Overview

Power Supply
PLC Engine
Communication
Alarm
General

Emergency power supply

• A high level of reliability is ensured by a 7 Ah lead gel storage battery for the emergency power supply
• High degree of reliability with direct switchover to emergency power operation
• Remote transmission of the battery charge level by SMS or e-mail

PLC Engine

With the integrated PLC Engine, it is possible to connect multiple inputs of Siproc industry and execute one or more actions
with a logical “true.”
For example, if a temperature sensor is connected to an analog input, a predefined alarm signal is transmitted by SMS together with the current temperature value on any deviation from the setpoint temperature. A fan, for example, can also be controlled from one of the many digital outputs of Siproc industry.
If you wish to execute rules outside normal working hours or at weekends, you can assign each rule a freely definable time schedule that controls execution according to your requirements.

Applications

• Power generation and distribution
• Wastewater technology
• Transportation systems
• Industrial plants
• Safety systems
• Environmental technology

Technical Data Siproc industry

Communication

• Quad-band GSM/GPRS/EDGE modem
• Data transmission rate EDGE class 12 up to 236.8 kbit/s (DL & UL)
• Data transmission rate GPRS class 12 up to 85 kbit/s
• Data transmission rate GSM modem up to 14.4 kbit/s

Inputs/outputs

• 2 digital inputs (passive)
• 4 digital inputs (active, isolated)
• Triggering for each input can be parameterized separately for:
  • Rising or falling signal edge
  • High or low impulse
  • High or low level
• 2 analog inputs
  • 10-bit resolution
  • Offset, correction factor and hysteresis can be set separately for the two inputs
  • Assignment of an engineering unit possible, e.g. °C
• 4 open collector outputs (up to 30V DC, 100mA)
• 2 relay outputs (up to 30V AC, 1A, parameterizable as NC or NO contacts)

Incoming messages

• Messages can be received by SMS, e-mail, phone calls and DTMF code
• Events can be triggered by one of the following
  • Message text
  • Telephone number
  • DTMF code
  • E-mail address
• Authentication by means of PIN

Outgoing messages

• Messages can be sent by SMS, e-mail, fax or voice message
• Message texts can be freely defined
• Up to 40 voice messages amounting to a total message duration of 240 seconds can be used
• Outgoing call with DTMF code

Time schedules

• Allows the execution of actions assigned to a particular weekday, date or time interval
• Every action can be assigned to its own time schedule
• Public holiday calendar for alternative time control can be defined one year in advance
• Supports 2 holiday types per schedule (for example, half day or full day)

PLC Engine

• Event and/or time controlled execution of routines
• Supports up to 10 executive routines
• Combination of different input types possible
• PLC logic operations:
  • Direct input/output operations
  • Negation
  • AND
  • OR
  • NAND
  • NOR
  • Exclusive OR
• Simultaneous triggering of up to 10 actions from the same event
• Acknowledgment function for alarms
• Simple definition of logic operations through a graphical use interface
• Large scope for controlling executions via schedules and holiday calendars

Interfaces

• USB Host V2.0 and USB Device V1.1
• RS232 (9.6 kbit/s)
• Ethernet 10/100 Base T

General

• Remote parameterization and firmware update by means of GSM/GPRS
• Keep-alive function for GPRS data connections
• GPRS connection established by means of a callback function
• FIFO logbook memory for events/actions
• LED status display of all important operating states
• Power supply: 9.5 to 28.8 V DC
• Optional lead-gel storage battery for emergency power:
  12V DC nominal voltage, up to 7.2 Ah
• A supply voltage of 18 V DC or more is required to recharge the battery
• Current-saving mode during emergency power operation
• Operating temperature: -20 to +60 °C
• Storage temperature: -40 to +85 °C
• Degree of protection: IP32
• Humidity: 0 % to 95%, no condensation
• Dimensions: 145 x 40 x 110 mm (H x W x D)
• Weight: 550g
• Certification: CE, R&TTE

Logistics

• Scope of delivery:
  • 1 x Siproc industry device in stainless steel housing
  • 1 x external GSM/GPRS antenna
  • 1 x 18 V DC plug-in power supply unit
  • Installation guide on paper
  • CD-ROM with parameterization software (German/English), operating manual
• ECCN: 3A991, AL: N
• Available from May 2008

Features

• Remote control and remote maintenance
• Communication via SMA, e-mail, fax, voice, data modem
• Supports alarm acknowledgment using DTMF code
• Integrated PLC Engine
• Realtime clock with schedule function and
• Holiday calendar, digital and analog inputs
• Open collector signal outputs
• Electrically isolated relay outputs
• Ethernet, USB, and RS232 interface
• Emergency power supply with optional lead-gel storage battery
• User-friendly parameteriziation and operation using PC software
• Integration in software systems possible